Description
Light Source Type | Visual lasing diode; the wave length is 650mm. |
Trigger mode | Manual (can be switched off after the on/off button is pressed for several seconds). |
Scanning Pattern | Single-line scanning |
Scanning speed | 100±2 times /s |
≥4mil | Shared system memory up to 256Mb. |
Printing Contrast Ratio | The lowest reflectivity difference is 30% |
Bit error rate | 1/50 million |
Charging input voltage | 5VDC±0.25V |
Power: 100mW (work) | 500mW (momentary maximum) |
Current: 20mA (work) | 100mA (momentary maximum) |
Standby current | <20mA |
Light intensity | 3000-12000Lux |
Depth of field | 5mm-630mm |
Scanning angle | ±60°±65°±42° (Left and right, front and back, rotation) |
Decoding capacity | Code 39 Full ASCII, Code 39 TriOptic, Code 128, Code 128Full ASCII, Codabar,Code93, Discrete2of5, IATA,RSSvariants, Codabar, Chinese2of5,International general dimensional barcodes, e.g. Inteleaved2/5, Interleaved2of5 and China postal service code. |
Promotion pattern | Buzzer and LED indicator |
Weight | 200g |
Charging interface type | RJ-45 crystal head, one meter long (equipped with 5V charger; the battery is being charged when the red light is on and fully charged when the green light is on). |
Hull material | ABS+PC |
Temperature | 0 to 50 (Work):-40 to 60 (storage) |
Setting mode | Manual (scanning and setting barcodes according to the sequence) |
Laser safety class | EN60825-1, Class 1, state level-I laser safety standard |
EMC | EN55022, EN55024 |
Electrical safety | EN60950-1 |
Packaging level | IP54 |
Anti-seismic capacity | This product can still work properly after falling down and being impacted on the concrete floor from the height of 2m for many times |